| N° | § N° | U/AI | CR | Date | Comment | Status |
|---|---|---|---|---|---|---|
| 1 | 2. | AI | No | add date | Is fulfilled because ASTM B167-23 (latest edition) is applied for product evaluation and testing, ensuring compliance with the latest ASTM requirements. --- Source: Angie | Open |
| 2 | 3. | AI | No | add date | Is fulfilled because DMV 690 (UNS N06690) tubes are manufactured and tested according to ASTM B167, covering chemical composition, manufacturing, testing, and dimensional tolerances for cold finished tubes as required for the inquiry positions (ASTM ... | Open |
| 3 | 4. | AI | No | add date | DMV 690 (UNS N06690) cold finished tubes comply with ASTM B167; chemical, mechanical, dimensional, and certification requirements are met for all listed sizes and specifications, with no deviations or missing data. Sources: Digest ASTM B 167-11 (reap... | Open |
| 4 | 5. | AI | No | add date | DMV 690 (UNS N06690) cold finished pipes are manufactured and supplied strictly in accordance with ASTM B167, fulfilling all standard requirements for chemical composition, mechanical properties, manufacturing process, testing, marking, and certifica... | Open |
| 5 | 5. | AI | No | add date | Type 3.1 certificate according to EN 10204:2005 is provided as standard for mill inspection, validated by Quality Control, fulfilling the requirement. --- Sources: - 14-02 - Inspection Montbard plant.doc - 14-03 - Certification Montbard plant... | Open |
| 6 | 5. | AI | No | add date | All positions are specified as cold finished and seamless, and ASTM B167 covers seamless cold worked tubes, fulfilling the requirement. --- Sources: Digest ASTM B 167-11 (reapproved 2016), Digest ASTM B 167-18, Angie | Open |
| 7 | 5. | AI | No | add date | Materials are supplied annealed and de-scaled as required by ASTM B167 for UNS N06690/DMV 690; standard supply conditions include annealing and de-scaling by pickling or bright annealing, fulfilling the requirement per the material specification. ---... | Open |
| 8 | 5. | AI | No | add date | Hydrostatic test and NDE are only available on request or at extra cost, not performed as standard or for all requested dimensions; no confirmation both will be done per code for all items requested, so requirement is not fulfilled for the Montbard p... | Open |
| 9 | 5. | AI | No | add date | No evidence that DMV 690 (UNS N06690) meets the grain size requirement of 2 to 5 (target 3 to 4) per ASTM E112; no relevant data or references found in the reviewed sources. --- Sources: - DMV_STANDARD_BOOK/12-03-03 - Grain Size Examination in DMV-I.... | Open |
| 10 | 5. | AI | No | add date | Metal stamping, including vibro-etching, is permitted and standard practice; prohibition of metal stamping is not guaranteed or evidenced. Marker pen is not the sole marking method allowed. --- Sources: - DMV_STANDARD_BOOK/13 - Marking/13-02 - Stand... | Open |
| 11 | 5. | AI | No | add date | Is fulfilled because ends are required to be 'Plain cut, deburred,' ensuring removal of all burrs and sharp edges. --- Sources: - DMV_STANDARD_BOOK/02 - Specifications-Digest-collection/02-03 - Detailed digests/02-03-02 - ASTM B/02-03-02 - Digest... | Open |
| 12 | 5. | AI | No | add date | PMI is performed as a qualitative anti-mixing check, not full quantitative PMI on all raw materials; quantitative PMI is only done if specified, and default is sampling, not 100% coverage. No evidence of PMI on all raw materials for this order; only ... | Open |
| 13 | 5. | AI | No | add date | No relevant standard or specification confirms a center deviation tolerance of +/-0.05mm; only OD, WT, ovality, straightness, and eccentricity are addressed, but not this specific geometric tolerance within the provided sources. --- Sources: - DMV_S... | Open |
| 14 | 5. | AI | No | add date | Is fulfilled because ASTM B167 and referenced practices specify that wall thickness can be designated as minimum, and the tube list applies tolerances accordingly, matching the requirement that listed thickness is considered minimum. Database confirm... | Open |
| 15 | 5. | AI | No | add date | O.D. tolerance of +/- 0.25mm is only met for some sizes; for larger ODs, standard tolerances are looser. Required length tolerance of +3/-0mm is not confirmed in any referenced standard or product data. Thickness per CODE is not contradicted, but ove... | Open |
| 16 | 5. | AI | No | add date | O.D. tolerance '+/- 0.25mm' is specified for all DMV 690 (UNS N06690, ASTM B167) positions and matches the requirement; ASTM B167 permits client-specific tolerances and this is confirmed for all items. --- Angie | Open |
| 17 | 5. | AI | No | add date | Is fulfilled because wall thickness and tolerances for UNS N06690 (DMV 690) are specified and controlled per ASTM B167 and ASTM B829, meeting CODE requirements for all queried products and dimensions, with no evidence of non-conformance or deviation ... | Open |
| 18 | 5. | AI | No | add date | No evidence of +3 / -0mm length tolerance being available or fulfilled; standards and feasibility documents indicate only standard or less strict tolerances are possible, and inquiry data does not specify +3 / -0mm tolerance for any position. --- Sou... | Open |
| 19 | 5. | AI | No | add date | Is fulfilled because all requested positions use DMV 690 (UNS N06690) and comply with ASTM B167, which covers chemical composition, mechanical properties, and testing frequencies for catalyst tubes of this alloy, matching the requirement unless the c... | Open |